Hebei best made in China replacement parts in Doha Qatar Carton Machinery Auto Flexo Printer Printing Slotting Machine with top quality

Hebei best made in China  replacement parts  in Doha Qatar Carton Machinery Auto Flexo Printer Printing Slotting Machine with top quality

We – EPG Team the most significant gearbox & motors , couplings and gears manufacturing unit in China with 5 diverse branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

1270*2800 4 coloration flexo printing slotting&rotary die reducing machine

Use and performance
1.The entire device electrical appliances adopt well-known brand name.
two.The transmission equipment of the equipment adopts 40Gr to be quenched and tempered.
three.All axes are dealt with with chromium plating to increase the area hardness.
four.The gear undertake round spray lubrication drive.
five.The host undertake frequency conversion manage.
six.Module design and style, any combination of multicolor printing device.

Parameter:

1 Device measurement MM 1270X2800
2 Max paper dimension MM 1250X2600(Steady paper)
three Max.design and style speed Pcs/min one hundred twenty
four Min paper measurement MM 420*600
5 Separate feeding dimensions MM 1600X2600
7 Max printing region MM 1200X2400
8 Wall plate thickness HT200 50mm
9 Feeding  precision MM ±1.
10 overprint precision(2/3/4color) MM ±0.5mm/±0.75mm/±1mm
11 Slotting precision mm ±1
12 Die slicing precision mm ±1
thirteen Printing roller diameter Φ 410(contain printing plate)
14 Total electricity(2/3/4color)   32KW/36KW/40KW

Feeder:
A.Front edge feeding method.(Can also be equipped with mild strain, or strain cost-free entrance paper feeding mechanism)

  1. Three axis front feed, boost the stream of supporters, to sustain high speed, low pace paper feeding precision, the smallest paper width 350mm.
  2. Adjust the air circulation and stress in 4 sections to match the measurement of the board.
  3. Positioning by the entrance baffle to decrease feed mistakes, enhance paper feeding, printing and die-cutting precision.
  4. Electrical control of still left and right baffle.
  5. Electrical management of rear supporting board.
  6. Entrance paper baffle clearance altered by manual.
  7. Equiped with ongoing and intermittent paper feeding operate. (optional or continuous feed) as essential.

B.Higher and reduce roll

  1. Higher roller:The outside diameter is 155mm,use resistant rubber on the floor of steel pipe.
  2. Reduced roller: the outer diameter of the 155mm paper feeding roller floor embossed plated challenging.
  3. Feeding pressure roller adjustment gap guide adjustment, adjustment range -12mm.
  4. The power transmission of the force roller is driven by the rolling cross coupling, which reduces the abrasion and tends to make the transmission far more well balanced.
  5. Machine clutch, accompanied by sirens, keep on to ring the alarm when traveling, to ensure the security of operators.
  6. The driving shaft is presented with a friction type clutch to avoid the misoperation and injury to the machine.
  7. The principal motor is outfitted with defense device (not start off machine loc ept when the host is unable to switch the shipment).
  8. Paper feeding device electrical automated zeroing.
  9. The common carton use automated zeroing system, attempt printing 1 to 2 pieces of cardboard can be adjusted to the proper position, reduce cardboard waste.

Printer:
A.Printing roller

  1. The outer diameter is 395.6mm (with diameter of 410mm).
  2. High high quality metal, surface area grinding, tough chromium plating.
  3. Scroll hanging edition, utilizing the proper and remaining sides of the loc ept device, so that the more accurate model of the hanging.
  4. Complete variation of hanging plate hook, adopt 9mm hanging bar.
  5. Loading and unloading printing board, foot change electrical manage ept and reverse.

B.Printing push roller

  1. The outdoors diameter is 155mm
  2. Metal pipe surface area grinding, hard chromium plating.
  3. The strain roller hole is altered manually, and the adjustment range is -12mm.

C.The steel roller (custom-made according to customer desire for the mesh) (high with 250 mesh ,optional ceramic roller)

  1. The outside the house diameter is 215mm.
  2. The surface of the metal pipe is manufactured of advanced chromium plating procedure.
  3. Dot regular, ink uniform.
  4. Lengthen the service daily life of printing plate and rubber roller.
  5. The anilox roller clearance is modified manually, and the adjustment assortment is -12mm.

D.Rubber roller

  1. Uniform ink roller, coated with use-resistant rubber, rubber roller higher parabolic variety, to compensate for the force deformation, boost the influence of inking. Rubber for the butyl rubber, shore hardness of 60 levels or far more, via the specific impact of good polish ink. The rubber roller is driven by the motor when the device is stopped.

two.The outside diameter is 205mm
3.The rubber roller clearance is modified manually, and the adjustment selection is -12mm.
E.Period modifying system

  1. Planetary gear composition.
  2. The printing period is controlled by pc and electric powered digital manage (360 degrees)
  3. The transverse direction of the printing roller is modified manually, and the adjustment range is 5mm.
  4. The printing plate roller employs the electrical adjustment period, to return to zero and the edition pace is quick, adjusts the version precision to be large.

F.Paper feeding roller
one.Paper feeding upper roller, outer diameter of 86mm, high quality metal plated hard chromium with 4 guidebook wheel diameter of 125mm.
2.Paper feeding lower roller, outer diameter is 155mm, information paper roll plating hard chromium.
three.The information roll hole is adjusted manually, and the adjustment assortment is -12mm.
G.Ink circulation structure

  1. Pneumatic diaphragm pump for ink steadiness, straightforward operation and servicing.
  2. Ink filter,Filter impurities

H. Printing roller repairing unit

  1. Adopt pneumatic brake mechanism. When the unit is utilised for separating and changing the period or cleansing, the brake system restrictions the equipment to rotate, and the set place of the original gear situation is maintained.
  2. The electricity transmission of the stress roller is pushed by the rolling cross coupling, which decreases the abrasion and helps make the transmission more stable.

Slotter:
one.The outer diameter of the cutter shaft is 156mm, the outer diameter of the cutter shaft is 156mm, and the surface is plated with difficult chromium.
2.Push line wheel clearance manual adjustment.
3.Width of slotting cutter 7mm. Alloy metal material.
four.Slotting knife seat clearance worm gear box adjustment, dial exhibit, adjustment variety – 10 mm.
five.Planetary equipment framework for slotting phase adjustment
6.Slotted phase employing the section controller digital 360 degree adjustment (run, quit can be altered)
7.Guide synchronization modify box top.
8.The top and bottom rollers of the stress line are 110 mm, which is created of substantial quality thick wall seamless metal tube, and the area is tough to be plated with difficult chromium. The wire diameter phi 176.

Die-chopping:
A. Rubber pad roller
1.The outer diameter of the rubber pad roller is 388.9mm.
2.Rubber pad roller for large top quality steel, area grinding, challenging chromium plating.
3.Rubber pad thickness 8mm, width 250mm.
4.The adjustment of the gap among the pad roller and the cutter roller adopts handbook adjustment, and the adjustment assortment is -16mm.
5.Automatic payment construction of rubber pad roller, automatic manage of pad roll pace.
6.Rubber pad roll chopping flat composition, preserve the pad roll.
7.The rubber pad roller adopts the 1:900 motor crankshaft rotation conversion to 30mm swimming transverse construction.
B.Die slicing roller

  1. Die roll 360mm.
  2. The die roller is of higher top quality steel, the surface area is grinded, difficult chromium plating.
  3. Dynamic stability correction, increased functioning steadiness.
  4. Die set screw hole spacing, horizontal 100mm, radial 12, screw gap M10.
  5. Software of line top 22.60mm
  6. Wood template thickness 13mm, blade top 25.4mm.
  7. The cutter roller adopts handbook adjustment, the adjustment range is 10mm

C.Die slicing section altering mechanism planetary gear variety framework.

  1. Die chopping stage employing the laptop and electric digital manage 360 diploma adjustment (run, cease can be modified).
  2. Press line wheel clearance guide adjustment, adjust the scope of 1-12mm, employing the cross slider mechanism, alter the transmission gear constantly make sure the appropriate meshing condition.
  3. Bottom cutter makes use of the intercontinental brand rubber pad.

Shipping Images:

Carton box photos:

Consumer Go to:

Factory Machine Procedure:

 

The use of authentic equipment manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our organization and the shown substitute elements contained herein are not sponsored, authorized, or created by the OEM.

Hebei best made in China  replacement parts  in Doha Qatar Carton Machinery Auto Flexo Printer Printing Slotting Machine with top quality

Hebei best made in China  replacement parts  in Doha Qatar Carton Machinery Auto Flexo Printer Printing Slotting Machine with top quality

Tags: